Agriculture, forestry and fisheries occupational safety guide
Field equipment must respond to the weather, machinery, terrain and seasonal changes in tasks.
In short
Field equipment has to follow the weather, machinery use, ground conditions and seasonal changes of task. The same worker sprays in spring, operates machines in summer and harvests in autumn - each with different protection. Layerability of clothing and the sole of the footwear are the two factors that count most.
Where a good specification begins
What should be clarified first?
Slippery ground, vegetation, hand tools, machinery noise, dust and chemical tasks require different solutions. Clothing layers, footwear soles and visibility must always be trialled on the actual terrain and in the relevant season.
Typical risk areas
- Changing weather and uneven terrain
- Cutting tools and machinery
- Noise, dust and biological exposure
- Pesticides and cleaning chemicals
Show us the work for a more precise quotation
A site photo or short video often explains more than a generic product list. It reveals the floor, working height, machinery and equipment worn together.
- Where does the work happen?
- Indoors, outdoors, in a wet zone, around vehicle traffic or at height.
- How long is it worn?
- For a full shift, a short intervention or only one defined work phase.
- What is worn with it?
- Helmet, eyewear, earmuffs, respirator and harness must remain comfortable and compatible together.
Which starting kit suits each role?
These are procurement starting points, not automatic PPE requirements.
| Role | Procurement starting point |
|---|---|
| General agricultural work | Weather-resistant layered clothing, terrain-appropriate footwear and mechanical hand protection. |
| Machine operator | Noise and dust protection according to measured exposure, with clothing that does not restrict movement. |
| Forestry work | Specialist clothing verified for the machinery and cutting risk, plus head, face and hearing protection. |
| Spraying and chemical handling | Hand, eye, body and respiratory protection selected from the SDS and application method. |
Expert product selection
Recommended products for your first shortlist
Start with relevant, easy-to-compare products selected for this working environment. Prices, availability and technical data are kept up to date.
Building blocks for the complete solution
Which markings are useful starting filters?
A standard marking can narrow the live product range quickly, but it does not by itself prove that a product is suitable for a particular role.
- EN 343
- Performance of protective clothing against rain for water penetration and water-vapour resistance. Consider the layering system, work intensity and wearing time together.
- Filter products by this marking
- EN ISO 20345
- Basic and additional requirements for general-purpose safety footwear. Match the protection class and optional markings to the floor, task and exposure.
- Filter products by this marking
- EN 397
- Basic and optional requirements for industrial safety helmets. Select for the impact hazard, environment, chinstrap needs and compatibility with other PPE.
- Filter products by this marking
- EN ISO 374-1
- Requirements for gloves protecting against dangerous chemicals. The type and chemical codes do not replace permeation data for the actual substance, concentration and contact time.
- Filter products by this marking
Always compare the results with the documented risk assessment, the required performance level and the product’s current EU declaration of conformity.
Plan in three layers
- 1. Core role kit
- Clothing, footwear and basic PPE used on every shift, with size runs and defined replacement triggers.
- 2. Task module
- Additional protection and checks issued for less frequent but higher-risk operations.
- 3. Reordering plan
- Minimum stock, size distribution, seasonality, inspections and documented approval points.
The detailed knowledge behind the decision
Seasonal planning
Winter PPE procurement: what to order before the season
A buyer’s guide to cold protection under EN 342 and EN 511, high visibility, slip prevention and an early-autumn checklist for complete size availability.
Read more →Respiratory protection
Choosing respiratory protection: FFP mask or reusable respirator?
How to select respiratory protection for particles, gases and vapours: FFP1–FFP3, A, B, E, K and P filters, combined cartridges, powered systems and face-seal checks.
Read more →Hand protection
Protective glove selection guide
Protective glove standards and markings explained: mechanical and chemical risks, cut resistance, materials, coatings, grip and sizing.
Read more →Procurement checklist
Before requesting a quote
Better input produces more comparable quotations, a more accurate size run and fewer later changes.
- 01 Create a task and season matrix for clothing
- 02 Trial equipment on the actual terrain
- 03 Match hearing protection to machinery noise
- 04 Review chemical tasks using current SDS data
Frequently asked questions
The questions that come up most often during procurement - the ones the rest of this article does not cover.
What protective equipment is needed for plant protection products?
The product’s safety data sheet tells you - it specifies the glove material, the type of protective clothing and whether respiratory protection is required. A choice made without the data sheet is made blind, and spraying is the operation where that is punished fastest.
What matters when working with a chainsaw?
Cut-protection trousers or chaps are base equipment here, not an accessory, alongside face and hearing protection. The cut-protection class follows the chain speed - a lower class does not slow the chain down enough.
How do we handle seasonal peaks?
By forecasting. During harvest the size run empties and replenishment is at its slowest. It is worth building a reserve of the main sizes before the season, because a working day lost to missing footwear costs more than the stock.
Professional and legal framework
This page supports decision-making. Specific obligations must always be established from current legislation, the local risk assessment and the documentation for the selected product.
-
Hungarian Act XCIII of 1993 on Occupational Safety
The Hungarian legal framework for risk assessment, prevention and employer responsibility.
-
Regulation (EU) 2016/425 on personal protective equipment
Essential requirements and conformity assessment for PPE placed on the EU market.
-
Hungarian Decree 65/1999 (XII. 22.) EüM on the use of PPE at work
Direct Hungarian requirements for workplace selection, compatibility, use, training and inspection.
-
EU-OSHA OiRA risk-assessment tools
A step-by-step risk-assessment framework, particularly useful for micro and small enterprises.
Important professional note
The product groups and combinations shown are starting points. They do not replace the employer’s documented risk assessment, PPE issue rules, the manufacturer’s instructions or the decision of a competent occupational safety professional. Always verify markings, compatibility and protective performance in the current documentation for the selected product.
Request a quotation assembled by role
Tell us the headcount, roles, current problem and required deadline. We will help plan trial items, size runs, decoration and replenishment.